Wishful Thirst Trap – Cocoon Mask

What it is: A mask packed with some of Huda�s favorites like rose, aloe vera, and sodium hyaluronate that will leave your skin feeling supple and hydrated after a single use.

Skin Type: Normal, Dry, Combination, and Oily

Skincare Concerns: Dryness, Dullness, and Uneven Texture

Formulation: Mask

Highlighted Ingredients:
- Hollyhock Rose Extract: Visibly softens and soothes the skin.
- Sodium Hyaluronate: Aids in hydration, resulting in plumper-, healthier-looking skin.
- Aloe Vera: Helps to cool and soothe the skin.

Ingredient Callouts: This product is cruelty-free.

What Else You Need to Know: Thirst Trap � Cocoon Mask is packed with ingredients like rose, aloe vera, and sodium hyaluronate that are notoriously good for soothing and hydrating the skin. The mask�s unique fibers hold up so much more essence than a conventional sheet mask, meaning you get even more ingredient-rich formula infusing into your skin.

Clinical Results: Tested on a panel of 22 people on all skin types, tones, and sexes all under dermatological control, after 1 use:
- 100% agreed their skin felt hydrated
- 100% agreed that their skin felt soothed
- 100% agreed that their skin was glowing

Clean at Sephora
Clean at Sephora is formulated without a list of over 50 ingredients, including sulfates (SLS and SLES), parabens, phthalates, and more. For the full list, check out the Ingredients tab.

Suggested Usage:
-Start with clean, dry skin.
-Remove the protective film from the mask.
-Apply to dry face and leave for 20 minutes.
-Remove and gently pat excess formula into the skin.

Size:
1 Mask

Ingredients:
-Hollyhock Rose Extract: Visibly softens and soothes the skin.
-Sodium Hyaluronate: Aids in hydration, resulting in plumper-, healthier-looking skin.
-Aloe Vera: Helps to cool and soothe the skin.

Water/Aqua/Eau, Glycerin, Methylpropanediol, Dipropylene Glycol, Niacinamide, Althaea Rosea Flower Extract, Aloe Barbadensis Leaf Polysaccharides, Sodium Hyaluronate, Caffeine, Adenosine, Allantoin, Ethylhexylglycerin, Butylene Glycol, Sodium Phytate, Caprylyl Glycol, Hydroxyacetophenone, Carbomer, Xanthan Gum, Tromethamine, Glyceryl Acrylate/Acrylic Acid Copolymer, Pvm/Ma Copolymer, 1,2-Hexanediol, Peg-40 Hydrogenated Castor Oil, Tocopherol, Fragrance/Parfum, Linalool, Limonene.

Clean at Sephora products are formulated without:
Sulfates�SLS + SLES, Parabens, Formaldehydes, Formaldehyde-releasing agents, Phthalates, Mineral Oil, Retinyl Palmitate, Oxybenzone, Coal Tar, Hydroquinone, Triclosan, Triclocarban, Undisclosed synthetic fragrances (Products can be formulated with disclosed synthetic fragrances that meet the following two criteria: (1) the synthetic fragrances do not include any of the ingredients listed in numbers 1 through 12 above and (2) the synthetic fragrances are at a concentration below 1% of the total formula) The following type of acrylates: (ethyl acrylate, ethyl methacrylate, methyl methacrylate, butyl methacrylate, hydroxypropyl methacrylate, tetrahydrofurfuryl methacrylate, trimethylolpropane trimethacrylate , aluminum salts), Animal Oils/Musks/Fats, Benzophenone + Related Compounds, Butoxyethanol, Carbon Black, Lead/Lead Acetate, Methyl Cellosolve + Methoxyethanol, Methylchloroisothiazolinone & Methylisothiazolinone, Mercury + Mercury Compounds (Thimerisol), Insoluble Plastic Microbeads (This prohibited ingredient applies to products that are meant to be rinsed off ), Resorcinol, Talc (Talc that is free of any asbestos can be used in the formulation provided that Brand conducts testing to ensure that talc is free of any asbestos.), Toluene, Butylated hydroxyanisole (BHA), Butylated hydroxytoluene (BHT) that is 0.1% or more of total formula, Ethanolamines DEA/TEA/MEA/ETA, Nanoparticles as defined by the European Commission, Petrolatum and Parrafin that is not USP grade, Phenoxyethanol that is 1% or more of total formulation, Polyacrylamide & Acrylamide, The following types of Styrene (Bromostyrene, Deastyrene/acrylates/dvbcopolymer, sodium styrene/divinylbenzene copolymer , styrene oxide, styrene), 1,4 Dioxane in final formulas must comply with the thresholds as follows: (10 or < ppm for products that are meant to be rinsed off, wiped off or removed, 3ppm or < for products that are meant to remain on the skin).

Clean at Sephora
Clean at Sephora is formulated without a list of over 50 ingredients,
including sulfates (SLS and SLES), parabens, phthalates, and more. For the full
list, check out the Ingredients below.

Clean at Sephora products are formulated without:
Sulfates—SLS + SLES, Parabens, Formaldehydes,
Formaldehyde-releasing agents, Phthalates, Mineral Oil, Retinyl Palmitate,
Oxybenzone, Coal Tar, Hydroquinone, Triclosan, Triclocarban, Undisclosed
synthetic fragrances (Products can be formulated with disclosed synthetic
fragrances that meet the following two criteria: (1) the synthetic fragrances
do not include any of the ingredients listed in numbers 1 through 12 above and
(2) the synthetic fragrances are at a concentration below 1% of the total
formula) The following type of acrylates: (ethyl acrylate, ethyl methacrylate,
methyl methacrylate, butyl methacrylate, hydroxypropyl methacrylate,
tetrahydrofurfuryl methacrylate, trimethylolpropane trimethacrylate , aluminum
salts), Animal Oils/Musks/Fats, Benzophenone + Related Compounds,
Butoxyethanol, Carbon Black, Lead/Lead Acetate, Methyl Cellosolve +
Methoxyethanol, Methylchloroisothiazolinone & Methylisothiazolinone,
Mercury + Mercury Compounds (Thimerisol), Insoluble Plastic Microbeads (This
prohibited ingredient applies to products that are meant to be rinsed off ),
Resorcinol, Talc (Talc that is free of any asbestos can be used in the
formulation provided that Brand conducts testing to ensure that talc is free of
any asbestos.), Toluene, Butylated hydroxyanisole (BHA), Butylated
hydroxytoluene (BHT) that is 0.1% or more of total formula, Ethanolamines
DEA/TEA/MEA/ETA, Nanoparticles as defined by the European Commission,
Petrolatum and Parrafin that is not USP grade, Phenoxyethanol that is 1% or
more of total formulation, Polyacrylamide & Acrylamide, The following types
of Styrene (Bromostyrene, Deastyrene/acrylates/dvbcopolymer, sodium
styrene/divinylbenzene copolymer , styrene oxide, styrene), 1,4 Dioxane in
final formulas must comply with the thresholds as follows: (10 or < ppm for
products that are meant to be rinsed off, wiped off or removed, 3ppm or <
for products that are meant to remain on the skin).